All publications, listed chronologically



* = peer-reviewed 

1980's



1. Clark, D. E., and D. G. Howden, “Fluid Flow and Penetration in Spray-transfer GMA Weld Pools,” 65th Annual Meeting, American Welding Society. Dallas, Texas: American Welding Society, 1984.

2. Clark, D. E., “Joining of Rapidly Solidified Products: A Technical Assessment,” EG&G Idaho (Idaho National Laboratory Contractor), 1984.

3. Clark, D. E., et al., “Welding Metallurgy of a Rapidly-Solidified Type 304 Stainless Steel,” 66th Annual Meeting, American Welding Society. Las Vegas, Nevada: American Welding Society, 1985.

4. Clark, D. E., C. J. Einerson, and R. B. Loop, “The Gas Tungsten Arc Weldability of Rapidly Solidified Alloys,” EG&G Idaho (Idaho National Laboratory Contractor), 1985.

5. Clark, D. E., C. J. Einerson, and R. B. Loop, “Capacitor Discharge Welding for the Joining of Rapidly Solidified Materials,” EG&G Idaho (Idaho National Laboratory Contractor), 1986.

6. Bolstad, J. O., D. E. Clark, and H. B. Smartt, “Laser Strobe Weld Pool Vision for Robotic Arc Welding,” 67th Annual Meeting, American Welding Society. Atlanta, Georgia: American Welding Society, 1986.

7. Clark, D. E., C. J. Einerson, and R. B. Loop, “The Weldability of Rapidly Solidified Type 304 Stainless Steel,” 1986 International Conference on Trends in Welding Research. Ed. S. A. David. Gatlinburg, Tennessee: ASM International, 1986. 817-820.

8. Clark, D. E., C. J. Einerson, and J. H. Devletian, “Modeling of GTA and Rapidly Solidified Capacitor Discharge Welds,” 68th Annual Meeting, American Welding Society. Chicago, Illinois: American Welding Society, 1987.

9. Einerson, C. J., D. E. Clark, and J. H. Devletian, “A Numerical Model of the Rapid Solidification Parameters in the Capacitor Discharge Welding Process,” 1987 ASME-JSME Thermal Engineering Joint Conference. Ed. P. J. Marto and I. Tanasawa. 5 vols. Honolulu: American Society of Mechanical Engineers, 1987. 3: 217-224.

10. Buhrmaster, C. L., D. E. Clark, and H. B. Smartt. “Spray Casting Aluminum and Al/SiC Composites.” J. Met. 40.11 (1988): 44-45.

11. Clark, D. E., and G. E. Korth. “The Weldability of Consolidated Rapidly Solidified Type 304 SS Powders,” Rapidly Solidified Materials: Properties and Processing. Ed. P. W. Lee. San Diego: ASM International, 1988. 9-17.

12. Einerson, C. J., and D. E. Clark, “Numerical Modeling of Gas Tungsten Arc and Capacitor Discharge Welding of Rapidly Solidified Alloys,” EG&G Idaho (Idaho National Laboratory Contractor), 1988.

13. Clark, D. E., “Joining of Advanced Aluminides--Final Report,” EG&G Idaho (Idaho National Laboratory Contractor), 1988.

14. Clark, D. E., “Short-Term Thermal Response of Rapidly Solidified Type 304 Stainless Steel Containing Helium,” EG&G Idaho (Idaho National Laboratory Contractor), 1988.

15. Clark, D. E., “The Weldability of Chromium-Containing Ni3Al-Type Advanced Aluminides,” 69th Annual Meeting, American Welding Society. New Orleans, Louisiana: American Welding Society, 1988.

16. Clark, D. E., “The Weldability of Rapidly Solidified Alloys,” Monterey Seminar of the Golden Gate chapter of the American Society for Metals. Monterey, California: American Welding Society, 1989.

17. Clark, D. E., and G. E. Korth, “The Weldability of Consolidated Rapidly Solidified Type 304 SS Powders,” Fall Meeting of TMS/AIME. Indianapolis, Indiana: 1989.

18. Clark, D. E., C. L. Buhrmaster, and H. B. Smartt. “Drop Transfer Mechanisms in GMAW”. 2nd International Conference on Trends in Welding Research. Ed. S. A. David. 1 vol. Gatlinburg, Tennessee: ASM International, 1989.

19. Clark, D. E., H. B. Smartt, and J. A. Johnson. “Computer-Derived Parameters and Control of Gas Metal Arc Welding,” Golden Gate Materials Technology Conference. Santa Clara, California: 1989.

20. Clark, D. E., G. R. Smolik, and J. E. Flinn. Influence of Temperature Gradients on Porosity and Swelling Development in Fe-40Ni Containing Noble Gases Entrained During RSP. 188th Annual Meeting, TMS/AIME. Las Vegas, Nevada: 1989.

1990's



21. Clark, D. E., and R. J. Glovan. “Preliminary High Temperature Corrosion-Erosion Testing of Nickel Aluminides in an MHD Generator,” Corrosion-Erosion-Wear of Materials at Elevated Temperatures. Ed. Alan V. Levy. 1 vol. Berkeley: National Association of Corrosion Engineers, 1990. 1: 34-1 to 34-6.

22. *Johnson, J. A., N. M. Carlson, H. B. Smartt, and D. E. Clark. “Process Control of GMAW: Sensing of Metal Transfer Mode.” Welding Journal Welding Research Supplement 70.4 (1991): 91s-99s.

23. Cordes, G. A., et al., “Implementation of a Fuzzy Logic/Neural Network Multi-Variable Controller,” ANS/ENS 1992 International Conference. 1992.

24. Carmack, W. J., et al., “Mixed Carbide Fuel Solidus Melting Temperature,” 9th Symposium on Space Nuclear Power Systems. Albuquerque: 1992.

25. Clark, D. E., E. D. Larsen, H. B. Smartt, and K. L. Moore, “Neural Networks for Cupola Control,” American Society for Metals meeting, Chicago, 1994.

26. Clark, D. E., E. D. Larsen, H. B. Smartt, and K. L. Moore, “Advanced User Interfaces and Intelligent Control,” INL Supercomputing Symposium, Idaho Falls, October 1994.

27. Larsen, E. D., D. E. Clark, H. B. Smartt, and K. L. Moore, “Advanced Control of Cupola Melting,” in proceedings of US-DOE Technology 2004 Conference, Washington DC, November, 1994.

28. Clark, D. E., E. D. Larsen, K. L. Moore, V. Stanek, P. E. King, S. Katz. “Neural Network Applications For Cupola Melting Control” 2nd International Symposium, Materials Processing in the Computer Age, Voller, Marsh and Al-Kaddah, eds., TMS, Las Vegas, February 1995.

29. Larsen, E. D., D. E. Clark, H. B. Smartt, and K. L. Moore, “Intelligent Control of Cupola Melting,” 99th Casting Congress, American Foundrymen’s Society, Kansas City, May 1995.

30. *Moore, K. L., M. A. Abdelrahman, D. E. Clark, E. D. Larsen, et al., “A Multivariable Smith Predictor for Intelligent Control of a Cupola Furnace,” in Proceedings of the 1995 American Control Conference, Seattle WA. June 1995.

31. Clark, D. E., K. L. Moore, E.D. Larsen, “Advanced Cupola Melting Control,” in Proceedings of 1996 AFS Casting Congress and Expo, Philadelphia, PA, April 1996.

32. Larsen, E. D., D. E. Clark, K. L. Moore, and P. E. King “Intelligent Control of a Cupola Furnace,” in proceedings of US-DOE Technology 2006 Conference, Washington DC, October 1996.

33. *King, P. E., L. G. Higgins, V. Stanek, E. D. Larsen, D. E. Clark, and K. L. Moore, “AFS Cupola Model Verification - Initial Investigations,” Transactions of the American Foundrymen's Society, vol. 97-189, pp. 1-10, 1997.

34. Larsen, E. D., D. E. Clark, K. L. Moore, and P. E. King, “Intelligent Control of Cupola Melting” Australasia-Pacific Forum on Intelligent Processing and Manufacturing of Materials, Gold Coast, Australia, July 1997.

35. *Perry, K. E. Jr., J. S. Epstein, and D. E. Clark, “Phase Shift Moiré Studies of Processing- induced Residual Strain in Nickel 200 Spot Welds,” Optics and Lasers in Engineering, 27 (1997) 101-109.

36. *Moore, K. L., M. A. Abdelrahman, E. D. Larsen, D. E. Clark, and P. E. King, “Experimental Control of a Cupola Furnace,” in Proceedings of the 1998 American Control Conference, Philadelphia, PA, June 1998.

37. Clark, D. E., E. D Larsen, and S. Katz, “Neural Net Implementation of the Cupola Process Model”, 2nd International Cupola Conference Proceedings, Cincinnati OH, October 1998.

38. Moore, K. L., M. A. Abdelrahman, E. D. Larsen, and D. E. Clark, “Feedback Control of a Cupola - Concepts and Experimental Results”, 2nd International Cupola Conference Proceedings, Cincinnati OH, October 1998.

2000's



39. Clark, D. E. Telluride Power – A Brief Illustrated History of the Early Days. Telluride Association, Ithaca, NY, 2001. Spiral bound book with photographs, 60 pp.

40. *Cook, G. E., R. Crawford, D. E. Clark, and A. M. Strauss, “Robotic Friction Stir Welding,” Industrial Robot, 31:1, January 2004.

41. *Clark, D. E., K. S. Miller, and C. R. Tolle, “Tool design in friction stir processing: dynamic forces and material flow,” Proceedings of the 7th International Conference on Trends in Welding Research, Pine Mountain, Georgia, May 2005, pp. 173-178.

42. *Totemeier, T. C., and D. E. Clark, “Effect of transient thermal cycles in a supercritical water- cooled reactor on the microstructure and properties of ferritic-martensitic steels,” Journal of Nuclear Materials, 355 (2006) 104-113  Abstract

43. *Hurt, W. L., D. E. Clark, R. E. Mizia, and C. V. Robino, “Overview of a Welding Development Program for a Ni-Cr-Mo-Gd Alloy”, Proceedings of the 2007 Annual Meeting of the American Nuclear Society, Boston, June 2007 Abstract  Full paper in PDF format

44. *Smartt, H. B., D. P. Pace, E. D. Larsen, T. R. McJunkin, C. I. Nichol, D. E. Clark, K. L. Skinner, M. L. Clark, T. G. Kaser and C. R. Tolle. “Robotic Welding and Inspection System,” Trends In Welding Research Conference, Pine Mountain, Georgia, June 2008  Abstract  Full paper in PDF format

45. *Miller, K. S., C. R. Tolle, D. E. Clark, C. I. Nichol, T. R. McJunkin, and H. B. Smartt, “Investigation into Interface Lifting Within FSW Lap Welds,” Trends In Welding Research Conference, Pine Mountain, Georgia, June 2008  Abstract  Full paper in PDF format

46. *Tolle, C. R., T. A. White, K. S. Miller, D. E. Clark, and H. B. Smartt, “Experimental Investigation of Material Flows Within FSWs Using 3D Tomography,” Trends In Welding Research Conference, Pine Mountain, Georgia, June 2008  Abstract  Full paper in PDF format

2010's



47. *Mizia, R. E., Clark, D. E., Glazoff, M. V., Lister, T. E., & Trowbridge, T. L. “Optimizing the Diffusion Welding Process for Alloy 800H: Thermodynamic, Diffusion Modeling, and Experimental Work.” Metallurgical and Materials Transactions A, December 2011  Abstract

48. *Clark, D. E., R. E. Mizia, M. V. Glazoff, and M. W. Patterson “Diffusion Welding of Compact Heat Exchangers for Nuclear Applications” Trends In Welding Research Conference, Pine Mountain, Georgia, June 2012  Abstract  Full paper in PDF format

49. *Sabharwall, P., D. E. Clark, R. E. Mizia, M. V. Glazoff, and M. G. McKellar “Diffusion Welding Microchannel Heat Exchanger for Industrial Processes,” Thermal Science and Engineering Applications, v. 5 011009, March 2013  Abstract

50. Clark, D. E. “What the Recent Recommendation on Manganese Exposure Means to You,” Welding Journal, 93(8):36-40, August 2014. Full paper in PDF format

51. *Sabharwall, Piyush, Denis Clark, Michael Glazoff, Guiqiu Zheng, Kumar Sridharan, and Mark Anderson “Advanced heat exchanger development for molten salts,” Nuclear Engineering and Design, 280: 42-56, December 2014. Abstract